Call
Ask an Expert
Tel: +1-281-673-2800
Fax: +1-281-673-2931
Find an Office
Email
Email Us
Webinar

OSHA's Revised Chemical National Emphasis Program (CPL 03-00-021)

May 10, 2017 | 10:00 - 11:00 am CDT

OSHA's Revised Chemical National Emphasis Program - CPL 03-00-021

The US Department of Labor's Occupational Safety and Health Administration (OSHA) issued compliance directive CPL 03-00-021 (PSM Covered Chemical Facilities National Emphasis Program) which went into effect on January 17, 2017. This instruction describes an OSHA National Emphasis Program (NEP) for inspecting facilities with highly hazardous chemicals and replaces the old directive number CPL 03-00-014.

CPL 03-00-021 now covers both chemical facilities and petroleum refineries, which were covered previously by separate OSHA instructions. Chemical National Emphasis Program (CNEP) inspections will now be conducted in the same manner for all covered facilities. States with State Plans have been asked to adopt this NEP. Additional inspection resource tools have been added to assist compliance safety and health officers. The Environmental Protection Agency (EPA) Risk Management Program (RMP) 1 and 2 processes are now included in the "inspection targeting" process, and the CPL clarifies that targeting of "explosive manufacturing" includes pyrotechnic manufacturing facilities.

In this webinar, ABS Group will share our regulatory and process safety compliance insights into CPL 03-00-021. Webinar attendees will have the opportunity to discuss the new compliance directive with PSM Manager James Thompson, who authored Guidelines for Implementing Process Safety Management, 2nd Edition (Center for Chemical Process Safety, 2016), and gain expert knowledge of: 

  • Changes in OSHA compliance directive CPL 03-00-021 compared to CPL 03-00-014
  • How to prepare for an OSHA inspection under this NEP.

Presenter

James R. Thompson is a Certified Process Safety Auditor (CPSA) and Process Safety Management (PSM) Manager at ABS Group. He has more than 40 years of industrial experience in operations and PSM with DuPont, INVISTA and ABS Group. Thompson has been recognized as a CPSA by the Board of Environmental, Health and Safety Auditor Certifications (BEAC). He was the lead author for Guidelines for Implementing Process Safety Management, 2nd Edition (CCPS, 2016) and holds a BS degree in chemical engineering from the University of Texas at Austin.

About ABS Group

ABS Group of Companies, Inc. (www.abs-group.com), through its operating subsidiaries, provides technical advisory and certification services to support the safety and reliability of high-performance assets and operations in the oil, gas and chemical, power generation, marine, offshore and government sectors, among others. Headquartered in Houston, Texas, ABS Group operates with more than 1,500 professionals in over 30 countries. ABS Group is a subsidiary of ABS, a leading marine and offshore classification society.

Learn more about our Safety, Risk and Compliance services and Oil, Gas and Chemical market solutions.

Back to top